slenderness

英 [ˈslɛndənəs]

美 [ˈslɛndərnəs]

网络  细长度; 长细比; 纤细; 名词; 细长

BNC.40473 / COCA.40756

英英释义

noun

• the property of an attractively thin person
  Synonym:slightnessslimness
• relatively small dimension through an object as opposed to its length or width
  1. the tenuity of a hair
  2. the thinness of a rope
  Synonym:thinnesstenuity
• the quality of being slight or inadequate
  1. he knew the slenderness of my wallet
  2. the slenderness of the chances that anything would be done
  3. the slenderness of the evidence

双语例句

• Test results indicate that the ultimate load carrying capability of the CFST laced columns compressed eccentrically reduces with the increase of slenderness ratio.
  研究结果表明，随长细比的增加，钢管混凝土格构柱的极限承载力逐渐降低。
• Bearing behavior of cast-in-place piles with similar slenderness ratios in deep soil layer
  深厚土层中长径比相近灌注桩承载性状
• Bounds slenderness ratio among axial compression short columns, middle long columns and long columns were determined.
  确定了钢管煤矸石混凝土轴心受压短柱与中长柱以及中长柱与长柱的界限长细比；
• Impact of diameter-thickness ratio of steel tube and slenderness ratio of pier on extension, bearing capacity and energy absorbing of steel pier is studied as well.
  目的研究钢管径厚比和桥墩柱长细比参数对外置钢管补强圆形钢桥墩承载力、延性和吸收能量的影响。
• We try to combine slenderness with strength.
  我们力图将苗条和力量完美结合。
• In this paper, the bearing capacity and failure modes of long angle steel truss concrete columns with different eccentricities and slenderness ratio are studied.
  本文对不同偏心距和长细比的内含角钢桁架混凝土长柱在偏心荷载作用下的承载力和破坏情况进行了研究。
• Excessive slenderness ratio of the steel pipe concrete piles, initial deflection and tie-in disfigurement will lead to the pile bodys instability and influence its carrying capacity.
  淤泥质土对桩身的侧向约束很弱，钢管混凝土桩的长径比过大、初始挠曲、接头缺陷都可能导致桩身失稳而影响其承载力。
• The results show that the most remarkable factor is the slenderness ratio, the axial compression ratio takes second place and the steel ratio is third.
  结果表明，对其影响最大的为长细比，其次是轴压比，再次是含钢率。
• Laws of bearing capacity and mechanical property affected by slenderness ratio and load eccentricity ratio were investigated.
  根据试验结果，总结了长细比、偏心率对试件承载力和力学性能的影响规律。
• Volumetric efficiency, slenderness, span over length ratio increase with the cone angle.
  体积率、细长比和展长比都随着基本流场圆锥角的增大而增大。