shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.
生产结果表明，铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷，铸件品质稳定。 - The research of early age shrinkages of concrete is very important for the solutions of early age cracking of concrete engineering, especially for high performance concrete.
研究早龄期收缩对于解决混凝土工程，尤其是高性能混凝土的早期开裂具有重要意义。 - The properties of SCLC, such as anti-carbonization, permeability resistance, are better than those of ordinary performance concrete, but its dry shrinkages value will be bigger than that of ordinary performance concrete in the natural surroundings.
SCLC的抗渗性能和抗碳化能力要优于普通混凝土，但其在自然条件下的干缩值要大于普通混凝土。 - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究，并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - In order to ensure the forming accuracy of castings, it is necessary to consider the compensation for the shrinkages in the mould cavity for turbine blades brought by the solidification process.
为了保证精铸件的成形精度，制造所用的模具型腔必须对铸件的收缩变形进行补偿。 - Because 3D surface model contains huge number of triangles, a mesh simplification algorithm based on triangle edges shrinkages is presented in this paper to speed up the rendering in real time.
并对其生成的表面几何模型所包含三角面片数量巨大的问题，提出一种快速有效的三角形边收缩算法进行网格简化，提高了表面模型的绘制速度。 - At a fixed carbonization temperature, the shrinkages of tangential and radial directions were higher than that of axial direction.
在相同炭化温度下，竹材炭化过程中切向和径向的收缩率高于轴向。 - The strength of popular cement at 3d and 28d be equivalent to high C3S cement only when it had high specific surface area, but its drying shrinkages was more than that of high C3S cement at the same curing and drying condition.
普通水泥只有在很高的比表面积时，3d和28d强度才和高C3S水泥相当，但其干缩比高C3S水泥大得多。 - Influence of Ram Extrusion of PTFE Product Properties and Shrinkages
聚四氯乙烯柱塞挤出工艺对制品性能及收缩率的影响 - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。